SWADI AQUASET 210
AQUASET 210 is a two-component cementitious coating, composed of high-quality cement, properly selected & graded fillers, additives and acrylic polymer. It is suitable for achieving waterproofing for roofs, because it provides strong bonding, good waterproofing and excellent resistant to hydrostatic water pressure by forming highly elastic seamless coating over the applied concrete surfaces.
BENEFITS :- Simple to use - Double component, Mix the given quantity & use.
- Higher abrasion resistance, good adhesion to building materials similar thermal characteristics to concrete
- High flexural / tensile strength to control cracking
- Resists extreme hydro-static pressure
- Easy to apply & cost-effective
- Penetrates concrete, seals capillaries and hairline cracks and remains waterproof even if surfaces are damaged.
SWADI AQUASECURE 120
AquaSecure 120 is a unique chemical treatment for the waterproofing, protection and repair of concrete. AquaSecure consists of Portland cement, finely graded sand and active proprietary chemicals; it is applied as a cementitious slurry to the pre-saturated surface of existing above and belowgrade concrete structures. The active chemicals diffuse into the substrate and react with moisture and Inititate the development of a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete, as well as cracks, permanently sealing the concrete and preventing the penetration of water and other liquids from any direction, even under high hydrostatic pressure. AquaSecure 120 is also mixed in a Dry-Pac form for sealing strips at construction joints, or for the repairing of leaking cracks, faulty construction joints and other defects.
BENEFITS :- Simple to use - Double component, Mix the given quantity & use.
- Higher abrasion resistance, good adhesion to building materials similar thermal characteristics to concrete
- High flexural / tensile strength to control cracking
- Resists extreme hydro-static pressure
- Easy to apply & cost-effective
- Penetrates concrete, seals capillaries and hairline cracks and remains waterproof even if surfaces are damaged.
SWADI AQUALATEX 90
AquaLatex 90 is a Styrene Butadiene based liquid useful as an additive for concrete / mortars in waterproofing applications, as well protective coating to debars and cementitious substrates. It also serves as bond coat to repair section. It comes in the form of a milky liquid. It is fully soluble in water. It provides good adhesion, water resistance and chemical resistance. It reduces shrinkage and cracking of mix.
BENEFITS :- Simple to use - Double component, Mix the given quantity & use.
- Higher abrasion resistance, good adhesion to building materials similar thermal characteristics to concrete
- High flexural / tensile strength to control cracking
- Resists extreme hydro-static pressure
- Easy to apply & cost-effective
- Penetrates concrete, seals capillaries and hairline cracks and remains waterproof even if surfaces are damaged.