SILICA RAMMING MASS
SILICA RAMMING MASS is a high purity silica based refractory lining material for Induction furnace, CCM furnace and Ladle. Acidic Ramming Mass or Silica Ramming Mass is widely used in industries which working with SG Iron, Grey Iron and Cast Iron to make quality component products. It is a good resistance to temperature change and low costing in furnace lining with short heating and sintering time through dry preparation of Masses. The price is very attractive compare to others.
| SWADI PREMIX-SILICA RAMMING MASS | |
|---|---|
| SiO2 | 98 TO 99% |
| BASE RAW MATERIAL | QUARTZ/QUARTIZITE |
| GRAIN SIZE | 0-6 mm |
| QTY REQUIRED/ m3(Kg) | 2100 |
| Fe₂O₃ | 0.5% |
| BORIC ACID | 1.2 to 1.4 % |
| PACKING | 50 kgs laminated bags with inner lining |
| HEATS Furnace | 15-20 (depends on Capacity & Raw usage) |
| APPLICATION | CCM / Induction Furnace |
| SHELF LIFE | 3 Months from the date of manufacturing. |
CERAMIC TILE ADHESIVE Pdf
To Request an Technical Data Sheet , please fill out this form
Meterial Data PDF
To Request an Data Sheet , please fill out this form
| SWADI ACIDIC RAMMING MASS | |
|---|---|
| SiO2 | 98 TO 99% |
| BASE RAW MATERIAL | QUARTZ/QUARTIZITE |
| GRAIN SIZE | 0-6 mm |
| QTY REQUIRED/ m3(Kg) | 2100 |
| Fe₂O₃ | 0.5% |
| PACKING | 50 kgs laminated bags |
| APPLICATION | Ladle/Nalli Top |
| SHELF LIFE | 6 Months from the date of manufacturing. |
CERAMIC TILE ADHESIVE Pdf
To Request an Technical Data Sheet , please fill out this form
Meterial Data PDF
To Request an Data Sheet , please fill out this form
PATCHING MASS
It is widely used in Induction furnace and coke processing plants to patch the lining surface in order to offer protective surface. Prepared by our adroit professionals in accordance with international quality norms, proposed for induction furnace.
- Easy to apply and dry
- Good thermal stability
- High Plasticity and strength
- Resistance to erosion
| BRAND | SWADI PATCHING MASS |
|---|---|
| Raw Material Base | Dead Burnt Magnesite |
| Mgo | 85% min |
| SiO2 | 8% max |
| Cao | 2% max |
| Al2O3 | 1% max |
| Fe2O3 | 1.5% max |
| Grain Size | 0-1 mm |
| B.D @110°C/24hrs | 2.70 gm/cc |
| C.C.S @110°C/24hrs | 250 kg/cm2 |
| @1200°C/3hrs | 150 kg/cm2 |
| @1550°C/3hrs | 350 kg/cm2 |
| P.L.C @1200°C/3hrs | 0.2 % max |
| @1550°C/3hrs | 0.9 % max |
| Sintering Temperature | 1500°C |
| Maximum Service Temperature | 1700°C |
| Application Area | Induction Furnace |
BASIC RAMMING MASS
It is a magnesite based refractory lining material for Induction & Electric arc furnace. Basic Ramming Mass or Magnesite Ramming Mass is widely used in industries which work with high temperature like manganese steel, stainless steel, high carbon and high chromium steel to make quality products. Basic Ramming Mass has much longer life span compared to acidic ramming mass .
The wide range of basic ramming mass are produced using a blend of indigenous Dead Burnt Magnesite. Basic Ramming Mass find acceptance in coreless induction furnaces, EAF hearth, cold and hot steel launders.We source and supply basic ramming mass from the most trusted vendors in the market.
| BRAND | SWADI - BASIC RAMMING MASS |
|---|---|
| Raw Material Base | Dead Burnt Magnesite |
| Mgo | 86-88% min |
| SiO2 | 7.5% max |
| Cao | 2% max |
| Al2O3 | 1% max |
| Fe2O3 | 1.5% max |
| Grain Siz | 0-4 mm |
| B.D @110°C/24hrs | 2.85 gm/cc |
| C.C.S @110°C/24hrs | 300 kg/cm2 |
| @1200°C/3hrs | 200 kg/cm2 |
| @1550°C/3hrs | 400 kg/cm2 |
| P.L.C @1200°C/3hrs | 0.2 % max |
| @1550°C/3hrs | 0.9 % max |
| Sintering Temperature | 1550°C |
| MaximumServiceTemperature | 1750°C |
| Application Area | Induction Furnace/EAF |