Contacts

AG02

FREE FLOW, HIGH STRENGTH, NON-SHRINK, VERSATILE, CEMENTITIOUS PRECISION GROUT, CHLORIDE-FREE

SWADI - AG02 is supplied as a Ready to use dry powder. The addition of controlled amount of clean water produces a free flowing, non shrink grout for gap thickness up to 100 mm. AG02 is a blend of Portland cement, graded fillers and chemical additives. The low water demand ensures high early strength. The grade fillers are designed to assist uniform mixing and produce a consistent grout.
AG02 has very high days 7 days pull out bond strength of 40 to 50 N/mm . Which no other cement based grouts provides. Consistency in performance of AG02 grout is assured, as only recommended quantity of water is required to be added to the designed premix composition. The flowable and self-leveling properties ensure complete filling voids and perfect bearing. AG02 grout can be poured, pumped and compacted.

WHERE TO USE:

SWADI AG02 grouts are ideally suited to withstand static and dynamic loads. Typical applications would be the grouting for anchor bolts, machine base plates, bearing plates, pre-cast wall panels, void filling requirements, bore packing and also many other equipment foundations.

BENEFITS
  • Free flow ensures high level of contact with load bearing area.
  • High strength ensures the durability of the hardened grout.
  • Develops high early strength without the use of chlorides.
  • Reducing water content accelerates strength development & high compressive values
  • Does not segregate even at high flow – while pumping
  • Versatile, can be applied in any consistency from dry pack to fluid just by varying water content.
  • Mainly ease application and max field control, Add water, mix and place.


AG02

Technical Data PDF

To Request an Technical Data Sheet , please fill out this form

AG02-M

Material Data PDF

To Request an Material Data Sheet , please fill out this form




AG04

Technical Data PDF

To Request an Technical Data Sheet , please fill out this form

AG04-M

Material Data PDF

To Request an Material Data Sheet , please fill out this form


AG04

FREE FLOW, HIGH STRENGTH, NON-SHRINK, VERSATILE, CEMENTITIOUS PRECISION GROUT, CHLORIDE-FREE

SWADI - AG04 is supplied as a Ready to use dry powder. The addition of controlled amount of clean water produces a free flowing, non-shrink grout for gap thickness up to 100mm. AG04 is a blend of Portland cement, graded fillers and chemical additives. The low water demand ensures a ultimate strength. The grade fillers are designed to assist uniform mixing and produce a 2 consistent grout. AG04 has very high days 7 days pull out bond strength of 50 to 55 N/m . Which no other cement based grouts provides
Consistency in performance of AG04 grout is assured, as only recommended quantity of water is required to be added to the designed premix composition. The flowable and self-leveling properties ensure complete filling voids and perfect bearing. AG04 grout can be poured, pumped and compacted.

WHERE TO USE:

SWADI - AG04 grouts are ideally suited to withstand static and dynamic loads. Typical applications would be the heavy machinery base plates, compressors, turbines, bridge bearings, structural grouting of column base plates, generators and other equipment demanding high flow and high ultimate strength properties.

BENEFITS
  • Free flow ensures high level of contact with load bearing area.
  • High strength ensures the durability of the hardened grout.
  • Develops high early strength without the use of chlorides.
  • Reducing water content accelerates strength development & high compressive values
  • Does not segregate even at high flow – while pumping
  • Versatile, can be applied in any consistency from dry pack to fluid just by varying water content.
  • Mainly ease application and max field control, Add water, mix and place.


AG06 FS

FREE FLOW, HIGH STRENGTH, NON-SHRINK, VERSATILE, CEMENTITIOUS PRECISION GROUT, CHLORIDE-FREE

SWADI - AG06 FS is supplied as a Ready to use dry powder. The addition of controlled amount of clean water produces a free flowing, non-shrink grout for gap thickness up to 100mm. AG06 FS is a blend of Portland cement, graded fillers and chemical additives. The low water demand ensures an ultimate strength. The grade fillers are designed to assist uniform mixing and produce a 2 consistent grout. AG06 FS has very high days 7 days pull out bond strength of 50 To 55 N/mm . Which no other cement based grouts provides. Consistency in performance of AG06 FS grout is assured, as only recommended quantity of water is required to be added to the designed premix composition. The flowable and self-leveling properties ensure complete filling voids and perfect bearing. AG06 FS grout can be poured and compacted.

WHERE TO USE:

SWADI - AG06 FS grouts are ideally suited to withstand static and dynamic loads. Typical applications would be the heavy machinery base plates, compressors, turbines, bridge bearings, structural grouting of column base plates, generators and other equipment demanding high flow and high ultimate strength properties.

BENEFITS
  • Free flow ensures high level of contact with load bearing area.
  • High strength ensures the durability of the hardened grout.
  • Develops high early strength without the use of chlorides.
  • Reducing water content accelerates strength development & high compressive values
  • Does not segregate even at high flow – while pumping
  • Versatile, can be applied in any consistency from dry pack to fluid just by varying water content.
  • Mainly ease application and max field control, Add water, mix and place.


AG06 FS

Technical Data PDF

To Request an Technical Data Sheet , please fill out this form

AG06 FS-M

Material Data PDF

To Request an Material Data Sheet , please fill out this form




MICRO CONCRETE - MC07-M

Material Data PDF

To Request an Material Data Sheet , please fill out this form


MICRO CONCRETE - MC07

FLOWABLE HIGH STRENGTH MORTAR FOR NEW AND REPAIR DAMAGED REINFORCED CONCRETE

SWADI MICRO CONCRETE MC07 is a ready to use dry powder which requires only addition of clean water at site to produce a free flowing non shrink repair micro concrete. It is composed of good quality cement, properly selected aggregates & additives. It is used & designed for new and repair of damaged reinforced concrete elements, particularly where access is restricted and where vibration of the placed material is difficult or impossible.

WHERE TO USE:
  • Large volume concrete for new and old Repair substrate
  • Repair of corrosion damaged concrete
  • Jacketing of beams, columns and other structural elements for strengthening.
  • Pile head re-profiling.
FEATURES:
  • MC07 can be pumped or poured into restricted locations
  • Flowable mortar hence does not require compaction.
  • No primer required.
  • Very high and ultimate compressive strength.
  • Low permeability: provides very good protection against Carbon dioxide and chlorides.
  • Durability - Makes repaired sections highly durable & compatible to parent concrete.
  • Rapid strength gain helps in early reinstatement & removal of shuttering
  • Offers excellent resistance to moisture ingress.
  • Can be applied at 100 mm thickness at one stroke.