SEELA SUPER 999
SMOOTHING AND FAST SETTING SELF-LEVELLING COMPOUNDSEELA SUPER 999 is polymer - modified cement that has high flow characteristics and, in contrast to traditional concrete, does not require the addition of excessive amounts of water for placement. Self-levelling product also called self levelling concrete, is typically used to create a flat and smooth surface with a compressive strength similar to or higher than that of traditional concrete prior to installing interior and exterior floor coverings. Self-levelling concrete has increased in popularity as the degree of flatness and smoothness required for floor covering products has increased, with vinyl goods getting thinner and floor tiles getting larger.
WHERE TO USE:SEELA SUPER 999 is used in interiors and exterior for levelling and smoothing differences in thicknesses from 2 to 5 mm on new or existing substrates, preparing them to receive flooring where a high resistance to loads and traffic is required. Levelling and smoothing uneven internal sub-floors such as concrete, cement sand screed, quarry tiles, etc. prior to the installation of carpets, ceramic tiles, vinyl or parquet flooring and wooden flooring
- For smoothing and resurfacing paths, drives, parking areas, courtyards
- Can be used for repair variety of substrates.
- Suitable for internal and external applications
- Fast setting and can be walkable after 2 hrs.
- Floors is Ready to receive floor coverings within 48 hrs
- Installed form feather edge to several mm in one pour without shrinkage.
- Develop high compressive strength.
- Water resistant and do not promote the growth of microbial contaminates.
ULTRA HEAVY DUTY 899
SMOOTHING AND FAST SETTING HEAVY DUTY SELF-LEVELLING COMPOUNDULTRA HEAVY DUTY 899 polymer - modified cement that has high flow characteristics and, in contrast to traditional concrete, does not require the addition of excessive amount of water for placement. It Is used in Interiors and exterior for levelling and smoothing differences in thicknesses from 4 to 20 mm on new or old substrate, preparing them to receive flooring where a high resistance to load and traffic is required. ULTRA HEAVY DUTY 899 is especially suitable for areas subject to wheeled service loads as chairs and trolley. This product is also called self levelling concrete, with a High compressive strength compare to traditional concrete.
WHERE TO USE:ULTRA HEAVY DUTY 899 Will smooth and level concrete surface such as balconies, Domestic driveways, garage, walkways and other Concrete surface exposed to normal floor and rubber wheeled Loads. ULTRA HEAVY DUTY 899 can also be used in resurfacing damaged floors. Levelling and smoothing uneven internal sub-floors such as concrete, cement sand screed, quarry tiles.
- For smoothing and resurfacing paths, drives, parking areas, courtyards
- Replacement of new or existing concrete floor subject to foot traffic Industrial equipment and fork lift traffic
- Suitable for internal and external applications
- Floors is ready to receive within 48 hours
- For thicknesses from 4 - 20 mm in a single application
- Water resistant and do not promote the growth of microbial contaminates
RAPID PATCH FIX 799
SMOOTHING AND FAST SETTING COMPOUNDCementitious Self-levelling flooring is Uderlay Rapid Hardening Interiors levelling and smoothing Single Compound and to achieve Maximum flow without Shrinkage and Cracks resistance. Thicknesses can be Build from 4 to 25 mm on new or existing substrate. Preparing them to receive flooring where a high resistance to load and traffic is required.
WHERE TO USE:RAPID PATACH FIX 799 Will smooth and level concrete surface such as balconies, Domestic driveways, garage, walkways and other Concrete surface exposed to normal floor and rubber wheeled Loads. RAPID PATACH FIX 799 can also be used in resurfacing damaged floors. Levelling and smoothing uneven internal sub-floors such as concrete, cement sand screed,quarry tiles.
- For smoothing and resurfacing paths, drives, parking areas
- Used for repair variety of new and old substrates for internal application
- For thicknesses from 3 - 25 mm in a single application
- Suitable for internal applications
- Heavy Industrial traffic which develops high compressive strength
SEELA FEATHER FINISH
FEATHER FINISH PATCHING AND SMOOTHING COMPOUNDSEELA FEATHER FINISH cementitious featuring compound produce a rapid drying patching and Surface smoothing compound designed for very thin smoothing applications from 1 mm thick or less, provides an excellent bond to concrete, plywood, cement/sand screeds, existing sub-floor surface smoothing compounds without the use of primers.
WHERE TO USE:SEELA FEATHER FINISH is used in interiors and exterior for levelling and surface smoothing differences for Patching, filling/feather finishing, day work joints, edges, scratch, uneven trowel marks, etc.,
- Suitable for Patching, filling/feather finishing, day work joints, edges, scratch, uneven trowel marks, etc.,
- Fast setting and can be walkable after 2 hours.
- For thicknesses 1 mm or less with smooth surface