BASIC CERAMIC TILE ADHESIVE - CTA01
SWADI CTA01 is a grey, cement based polymer modified thick/thin set tileadhesive, designed for installing tiles on floor surfaces in interior situations.Excellent adhesion for fixing ceramic and porcelain tiles using thin or thick bed trowel on old and new substrates.
- Polymer modified adhesive
- Easy to mix & easy to apply
- Needs no curing and soaking of tiles
- Increases productivity and saves time
- Good bond strength
Shall depend primarily on the nature & flatness of the surface to be tiled and the method of application. However on a level background approximately 3.5kg/m2 adhesive shall be required at 3mm bed thickness using thin bed trowel.
SHELF LIFE: 12 Months when stored in normal dry conditionsPACK SIZE: 20kg and 50kg
TILE ADHESIVE STANDARD- TA02
GREY ADHESIVE FOR INTEIOR WALL & FLOOR TILESWADI TA02 is a grey, cement based polymer fortified thick/thin set tile adhesive, designed for installing tiles on wall & floor surfaces in interior situations. Excellent adhesion for fixing ceramic, vitrified and porcelain tiles using thin or thick bed trowel on exiting terrazzo and cement floors.
- Polymer modified adhesive
- Easy to mix & easy to apply
- Needs no curing and soaking of tiles
- Increases productivity and saves time
- High bond strength
- No Need to remove existing cement / terrazzo floors
Shall depend primarily on the nature & flatness of the surface to be tiled and the method of application. However on a level background approximately 3.5kg/m2 adhesive shall be required at 3mm bed thickness using thin bed trowel.
SHELF LIFE: 12 Months when stored in normal dry conditionsPACK SIZE: 20kg and 50kg
GREY GTA03 & WHITE ADHESIVE STONE BOND-WTA04
GREY/WHITE ADHESIVE FOR INTERNAL & EXTERNAL CLADDINGSWADI STONE BOND is available in both Grey & White colors is a cement based
polymer fortified thin set adhesive, designed for installing ceramic, porcelain,
mosaics, vitrified tiles & natural stones on floors & walls in interiors as well as
exterior situations.
Owing to its excellent bond strength, slip and water resistance. Swadi stone is
suitable for tile, tile on stone, swimming pools.
- High polymer fortified adhesive
- Easy to mix & easy to apply
- High bond strength & slip resistance
- Water resistant-can be used for swimming pools
- Needs no curing and soaking of tiles
- High bond strength
- No Need to remove existing cement / terrazzo floors
Shall depend primarily on the nature & flatness of the surface to be tiled and the method of application. However on a level background approximately 3.5kg/m2 adhesive shall be required at 3mm bed thickness using thin bed trowel.
SHELF LIFE: 12 Months when stored in normal dry conditionsPACK SIZE: 20kg and 50kg
MOSAIC BOND - MTA05
WHITE ADHESIVE FOR INTERIOR EXTERIOR & SWIMMING POOLSSwadi MTA05 is white cement based highly polymer enriched, flexile tile adhesive specially designed for fixing fully vitrified tiles, non porous tiles, natural stones & glass mosaics on wall in interior & exterior situations including swimming pools.
- High polymer enriched adhesive
- Flexible to sustain in substrate movements
- Excellent adhesion & slip resistance
- Highly water resistant- especially designed for swimming pools suitable for dry & wet areas
Shall depend primarily on the nature & flatness of the surface to be tiled and the method of application. However on a level background approximately 3.5kg/m2 adhesive shall be required at 3mm bed thickness using thin bed trowel.
PACK SIZE: 20kg and 50kgBLOCK FIX ADHESIVE - BFA06
For Interior And Exterior Thin Laying MortarSWADI BLOCKFIX is high quality dry mortar for fixing of concrete blocks, hollow bricks, fly ash bricks, soil cement block, earthen terra cotta blocks. It is premix of graded sand and cement specially designed with polymers which combine to give high strength and stability. This can be used at 2-3 mm thickness instead of conventional mortar which requires at 15-20mm thick.
- Economical & easy Application
- Crack resistance and Non-shrink
- Excellent Durable & Eco Friendly
- Excellent Adhesion Strength
- Suitable for all types of Blocks
- Self Curing Mortar
- Consistent Mix Quality
- Thin Bed Instead of conventional thick bed
READY TO PLAST - RTP07
SWADI READY TO PLAST is high quality dry premix Plaster suitable for all type of concrete Blocks, Bricks Concrete Blocks, Concrete Hollow Blocks, Aerated Light weight Blocks and Fly ash Bricks surfaces. It is premix of graded sand and cement specially designed with polymers which combine to give high strength and stability. Ready to Plaster Used for External, internal and ceiling rendering and it as a Rapid placing, better Smooth finish with Consistent quality throughout the application.
- Economical and ready to use for Plaster
- Eliminates improper grading
- Reduced rebound loss
- Excellent Durable & Eco friendly
- Increases yield and saves money
- Crack resistance and non-shrink.
- It avoids silt or mud which deteriorates plaster quality.
- It ensures quality plastering and enhances durability and Eco friendly
- Thickness of layer can be plastered from 6 mm to 15 mm.
WALLCARE PUTTY - WCP08
SWADI WCP08 is water resistant white cement based putty can be used on concrete / Mortar walls (Internal and External) & ceiling. Swadi wall putty binds strongly wit the base plaster, even if the surface is damp, and forms a protective base. Swadi wall putty fills up the fine pores in the walls and ceiling and provides a white, smooth & dry surface, essential for painting. Swadi wall putty offer you total protection against flaking, you are assured of a good looking hoe for years to come.
- Easy application & Self curing
- Smooth and uniform with excellent finish on rough surface
- Enhance bindings of the paint with the wall
- Good adhesion and tensile strength
- Excellent efflorescence resistance
- Decrease paint consumption
- Excellent resistance to water
- Highly durable & suitable for all types of paints
- All types of plasters and concrete wall
- Aerated light - weight blocks, Hollow Blocks & Ceilings
The Coverage area of WALL CARE PUTTY on smooth normal mortar wall is
1.5mm in two coats. The coverage area will depend upon the nature of the
substrate.
10-15Sqft/Kg for up to 1.5mm thickness in 2 coats
RUBBER / LATEX BASED FLEXI ADHESIVE - RBFA09
SWADI FLEXI Grey / White is a specially formulated adhesive available in a two component pack consisting of rubber based powder and latex based liquid. SWADI RBFA09 is a flexible, highly polymer fortified adhesive designed to fix tiles & stones on wood, metal, fiber cement board substrates & surfaces prone to limited vibration or movement due to thermal and mechanical reasons.
- Two parts specially formulated
- Flexible, high performance adhesive Ideal for fiber board, wood and metal surfaces
- Very high bond strength
- Self curing adhesive
Shall depend primarily on the nature & flatness of the surface to be tiled and the method of application. However on a level
backround a 12.5 kg pack SWADI RBFA09 will cover 4.5m2 at 3 mm bed thickness using thin bed trowel.
PACK SIZE: 5 Litres of SWADI FLEX liquid & 7.5Kg of SWADI FLEX Powder
FLEXI S10
HIGH PERFORMANCE, POLYMER, MODIFIED DEFORMABLE FIBRE, REINFORCE TILE/STONE ADHESIVESWADI FLEXI S10 - Grey/White, High-performance, polymer modified single component, deformable cementitious adhesive with classical compliance with ISO 200015, with no vertical slip and extended open time for installing ceramic tiles, Vitrified tiles, natural stones etc. particularly recommended for laying large porcelain, vitrified tiles, flexible tiles and natural stone on walls and floors in interior and exterior situations.
- Specially designed adhesive for larger format tiles
- Interiors and exteriors use up to 15 mm thick
- No substrate leveling required up to 15 mm
- Easy to apply